
AMD Radeon GPUs give VALORANT players plenty of control over image sharpness, color, frame pacing, and driver behavior. For competitive play, the target is straightforward: stable native FPS, clear visibility, and as little additional processing as possible.
Below, we have collected the best AMD Adrenalin settings for Valorant, including the correct Radeon Anti-Lag configuration, current AMD Fluid Motion Frames terminology, color adjustments, and display options.
Update AMD Software Before Changing Settings
Check the driver before adjusting the VALORANT profile. For this update, AMD lists Adrenalin 26.8.1 as the WHQL Recommended release, while 26.9.1 is available as an Optional driver. We would keep the Recommended version on a stable competitive PC and move to the Optional release only when it contains a fix that the system needs.
Laptop owners should check the support page for their exact model as well. AMD offers a general driver package, but manufacturers sometimes provide customized versions for a laptop’s display, power modes, or switchable graphics. Replacing one of those packages with the standard AMD Software: Adrenalin Edition driver is not always necessary.
Opening the VALORANT Profile in AMD Software
Open AMD Software: Adrenalin Edition from the Windows Start menu. The application may also appear in the menu that opens after right-clicking an empty area of the desktop.
Inside AMD Software, go to Gaming, select Games, and find VALORANT. If it is not listed, add the game manually and select its executable from the installation folder. We make the changes inside the VALORANT profile so that they do not carry over to games with different graphics requirements.

Once you have opened the settings program, you need to select the Gaming section and find Valorant itself, then open its settings.


AMD Graphics Settings for VALORANT
Select the Custom graphics profile and use the following values:
Setting | Recommended value |
Radeon Super Resolution | Disabled |
AMD Fluid Motion Frames 2.1 | Disabled |
Radeon Anti-Lag | Enabled |
Radeon Boost | Disabled |
Radeon Chill | Disabled |
Radeon Image Sharpening | Enabled |
Sharpness | 80% |
Radeon Enhanced Sync | Disabled |
Wait for Vertical Refresh |
Radeon Super Resolution is unnecessary when VALORANT already runs at the monitor’s native resolution. Radeon Boost lowers the rendering resolution during movement, which may make distant opponents and parts of the map look less consistent. Radeon Chill also stays off because it regulates the frame rate instead of keeping performance unrestricted.
Radeon Image Sharpening can make edges and small environmental details easier to see, especially at a lower resolution. An 80% sharpness value produces a strong effect. If outlines develop visible halos or the picture starts looking grainy, reduce the value until the image remains clear without appearing oversharpened.
Enhanced Sync and vertical synchronization remain disabled in this profile. That keeps the presentation path simple and avoids introducing synchronization behavior that may affect responsiveness. Players who are distracted by visible tearing can test these options separately and compare the result.

Should AMD Fluid Motion Frames Be Enabled in VALORANT?
The name currently used by AMD is AMD Fluid Motion Frames 2.1, or AFMF 2.1. “Manual” refers to a method of configuring the technology, not the required state of its switch. In the VALORANT profile, AFMF 2.1 should be Disabled.
AFMF places generated frames between the frames rendered normally by the game. The result may look smoother, but it does not make VALORANT process mouse input or game events at that higher displayed frame rate. We therefore favor native rendering, where every visible frame comes directly from the game.
Choosing the Right Radeon Anti-Lag Option
For our VALORANT profile, Radeon Anti-Lag stays enabled. It controls how CPU work is queued before the GPU renders a frame. The benefit depends on the system: it can be more noticeable under heavy GPU load, while a low-settings VALORANT setup may already be limited mainly by the processor.
Do not expect to find Anti-Lag 2 beside the standard driver switch. Radeon Anti-Lag 2 only works in games whose developers have added support for it, and AMD’s current compatibility list does not include VALORANT. There is therefore no official Anti-Lag 2 setting to activate inside the game.
That may change if Riot Games implements the technology in a future update. In that case, we would use the option added to VALORANT itself. For the current version of the game, the regular Radeon Anti-Lag switch in Adrenalin is the available choice.
The older Anti-Lag+ feature is a different matter. AMD acknowledged in 2023 that it had triggered anti-cheat bans in several games, then issued a driver that disabled it. Anti-Lag 2 should not be treated as another name for that discontinued implementation.
A review of the current AMD and Riot Games guidance shows no VALORANT-specific warning concerning the standard Radeon Anti-Lag switch and Vanguard. This does not make old preview drivers or unofficial ways of forcing unsupported features a good idea. If Vanguard begins reporting errors immediately after a graphics update, reset the VALORANT profile and install current game and driver updates before entering another match.

Using HYPR-RX with VALORANT
HYPR-RX saves time by applying several Radeon features through one preset, but it is broader than we need for VALORANT. Based on the game and installed hardware, it may activate Radeon Anti-Lag alongside Radeon Super Resolution, Radeon Boost, and AMD Fluid Motion Frames. HYPR-RX Eco can bring Radeon Chill into the configuration as well.
Some of those settings are useful in graphically demanding games, but they conflict with the competitive profile outlined above. We recommend selecting Custom after using HYPR-RX and checking the individual switches. AFMF 2.1, Radeon Super Resolution, Radeon Boost, and Radeon Chill should all remain disabled for VALORANT.
Advanced AMD Graphics Settings
Open the Advanced section and apply these settings:
- Anti-Aliasing: Use Application Settings
- Anti-Aliasing Method: Multisampling
- Morphological Anti-Aliasing: Disabled
- Anisotropic Filtering: Enabled
- Anisotropic Filtering Level: 8x
- Texture Filtering Quality: Performance
- Surface Format Optimization: Enabled
- Tessellation Mode: AMD Optimized
- OpenGL Triple Buffering: Disabled
We allow VALORANT to manage its own anti-aliasing instead of overriding it through the driver. Morphological Anti-Aliasing stays off because its filter is applied across the finished image and can make interface elements and fine details appear softer.
Set Texture Filtering Quality to Performance to avoid spending extra GPU resources on a driver-level quality preset. AMD Optimized is the appropriate tessellation mode here, as it leaves the choice of tessellation level to the driver instead of imposing a more demanding override.
OpenGL Triple Buffering has no practical role in the standard VALORANT setup and should remain disabled. Surface Format Optimization can stay enabled, allowing supported texture formats to be handled more efficiently.

Best AMD Color Settings for VALORANT
Color adjustments do not increase FPS, but they can make opponents, abilities, and map elements easier to separate visually. Use these values as a starting point:
- Custom Color: Enabled
- Color Temperature Control: Enabled
- Color Temperature: 6500
- Brightness: 0
- Hue: 0
- Contrast: 100
- Saturation: 160
- Display Color Enhancement: Disabled
- Color Deficiency Correction: Disabled
These best AMD color settings for Valorant create a vivid image without shifting the default brightness or hue. Saturation at 160 is intentionally strong and will not look identical on every monitor. Reduce it if bright colors lose detail, skin tones appear unnatural, or enemy outlines begin blending into heavily colored ability effects.
Display Color Enhancement stays disabled so that it does not alter the image on top of the manual values. Color Deficiency Correction should only be enabled when the player specifically needs one of its accessibility adjustments.


Best AMD Display Settings for VALORANT
Start with the monitor’s native resolution and highest supported refresh rate. Check the refresh rate in Windows as well as VALORANT, because a driver update or monitor change can return Windows to a lower setting without making the change obvious in-game.
Leave GPU Scaling off while using the native resolution. It becomes relevant after selecting a resolution that does not match the monitor. Choose Full Panel when the goal is to stretch the picture across the screen, or Preserve Aspect Ratio when the original proportions and side borders are preferred.
A lower resolution is mainly useful when the graphics card cannot maintain the desired frame rate. The tradeoff is a softer picture with less detail at distance. When native resolution already delivers FPS above the monitor’s refresh rate, lowering it provides little benefit and can make opponents harder to identify across the map.
Comments
Upcoming Top Matches




No comments yet! Be the first one to react