After the release of the Nintendo Switch 2, many users began noticing that the battery charge indicator was not working correctly. Sometimes the console shows that the battery is nearly empty, even though the device can still run for several more hours. This is not a hardware issue, but a software one, and it can be fixed.

Why the Issue Occurs

Nintendo has confirmed that the problem is related to the software, not a fault in the battery itself. Because of this, the battery indicator may be inaccurate. To resolve the issue, the company has suggested several methods for recalibrating the battery.

Method 1

This is the official method recommended by Nintendo:

• Update your system firmware to the latest version.
• Completely turn off the console.
• Press and hold the “Volume +” and “Volume –” buttons, then press the power button.
• Keep holding all three buttons until the recovery menu appears.
• Do not change any settings in the menu — simply power off the device from there, then turn it back on normally.
• Repeat this procedure 2–3 times if necessary.

This helps the system recalibrate the battery indicator.

Method 2

If the first method doesn't work, try manual recalibration using full battery cycles:

• Open settings and disable auto-sleep mode in all modes: handheld, TV-connected, and while watching media.
• Connect the power adapter and charge the console to 100%.
• Leave the console charging for an additional hour after reaching full charge.
• Disconnect the power and leave the console on in the main menu for several hours until the battery is nearly empty.
• Turn off the device and leave it off for at least 30 minutes.
• Repeat this cycle 2–4 times.

This allows the device to "learn" the actual battery capacity and display the charge level more accurately.

Recommendations After Calibration

Once the charge indicator begins working correctly, Nintendo recommends enabling the “Stop Charging Around 90%” feature in the battery settings. This option limits the battery charge to around 90%, which helps reduce battery wear over time.

These simple steps will help extend your console's battery life and ensure that its charge status is displayed accurately.